- Delta Hmi Dop B Usb Driver Downloads
- Delta Hmi Dop B Usb Driver Update
- Delta Hmi Dop B Usb Driver Software
Only HMISoft V1.18 or later supports Windows 7.
Delta DOP-100 Series HMI List on DOPSoft V4. Compatible with: Windows XP, Windows 7, Windows 8, and Windows 10 Note: The software can open and covert the DOP-B, DOP-W, and DOP-H series projects into the DOP-100 series projects. Download Delta DOP Soft V4, User manual. Software Name Description Operating System Issue Date File Size Comment File; DOP All Series Example Program File: For DOP-B, HMC, DOP-W,DOP-H Series: Windows XP 32bit/64bit, vista 32bit/64bit, Windows 7 32bit/64bit, Windows 8 32bit/64bit.
Download the HMISoft version 2.11 from the Eaton website using the link below:
To set up Windows 7 Upload/ Download compatibility on an HMI and HMISoft V1.18 or later there are two steps
Step 1- Update the firmware in the HMi. There are possible 4 methods- USB transfer from a Win XP machine, Serial Transfer, Ethernet transfer, and USB memory disk:
USB from a Win XP machine
-Connect USB cable to HMi
-In HMISoft select FILE > UPDATE FIRMWARE
Serial Transfer
- In HMISoft, go to OPTIONS > CONFIGURATION Standard tab and set Upload/ Download to PC COM PORT and select the com port number of your RS232 port or converter
- On your HMI, press and hold the SYS button to get to the system screen, then select DOWNLOAD PORT, then select the com port number on the HMi you're connect to, when asked BYPASS MODE? choose NO
- In HMISoft select FILE > UPDATE FIRMWARE
- Cable Pin Out 2 – 3
Delta Hmi Dop B Usb Driver Downloads
3 – 2
5 – 5
7 – 8
8 – 7
Ethernet Transfer (6, 8, 10 inch with HMIECENT ethernet expansion module)
- On the HMi, press and hold the SYS key to get to the system screen, select NETWORK and note the IP address of the HMi
- In HMISoft, go to OPTIONS > CONFIGURATION Standard tab and set Upload/ Download to ETHERNET
- In HMISoft select FILE > UPDATE FIRMWARE, in the dialog box uncheck AUTO SEARCH and enter IP address then click START
USB Disk (4, 8, 10 inch units only)
- Insert a USB Disk formatted FAT32 into your PC
Delta Hmi Dop B Usb Driver Update
- Open and compile a configuration in HMISoft
- Select FILE > MAKE EXT MEMORY DATA and select the drive letter of your USB Disk
- Insert the USB disk into an HMI and press and hold SYS to get to the system screen
- Select FILE MANAGER and select the icon that looks like an arrow pointing up from an IC chip
Step 2- Set the USBCommMode
- Press and hold the SYS button to get to the system screen.
- Press SETTINGS and scroll down to USBCommMode and use the + key to set the value to 1 for Win 7 compatibility, you must change to 0 for Win XP compatibility. Press the SAVE button then close and enter RUN mode.
You should now be able to perform downloads from your Win 7 PC to HMI via USB.
Nothing remains!
And finally Windows XP have a proper substitute, Windows 7.
Delta Hmi Dop B Usb Driver Software
Unfortunately, the people from Microsoft doesn’t think in HMI programmers, because the internal drivers has been changed…
Because of that we have found a solution to support those new drivers on our HMI’s.
So if you have a new Windows 7 or Windows Vista and your drivers doesn’t works, don’t worry, and just follow the next steps:
1 – Check the firmware of your HMI.
The first firmware version with the new Windows 7 drivers is V2.0170. If your HMI have a lower firmware version, please Update the HMI trough XP computer or serial port.
2 – Once you have the proper firmware, go to the system menu, and choose system setting.
3 – Then look for the MISC menu, and there you should found the option called “USBCommMode.”
4 – You only need to change that USBCommMode option from 0 to 1.
USBCommMode = 0 (Windows XP)
USBCommMode = 1 (Windows Vista & Windows 7)
If do you want further information of how to update the firmware trough serial port, please download the DOP-B and W7 trouble pdf from our ftp.
Remember!
name: den-eindhoven
Password: BuPd2175
Delta HMI’s are not compatible with Windows 7 (64 bits)
Problem Solved